Far Red Light for Plants: What It Does and When to Use It

    Which crop response justifies adding far-red: altered canopy outline, different internode length, or changed flowering date? Write that feature on the trial sheet beside the growth stage. The far-red setting may alter developmental cues, but a taller stem cannot establish a harvest gain. An untreated matching-age group provides the comparison; retain its lighting settings while observing plant form.

    What Is Far-Red Light for Plants?

    Conventional PPFD meters measure 400 to 700 nm; a 730 nm addition therefore remains uncounted. Check red/far-red balance using spectral measurements.

    Where Far-Red Light Fits in the Light Spectrum

    Find 700 to 750 nm on the spectral chart supplied with the fixture. Depending on the setup, it may be included in a fixture’s spectrum or supplied separately.

    See this LED grow light spectrum guide for how growers consider spectrum colors together. A spectrum chart cannot tell whether this crop stage needs extra far-red.

    How Far-Red Differs from Red Light

    Red contributes to PPFD; 730 nm is excluded. The plant still senses their balance. A taller stem may help one canopy and spoil a compact target; it does not establish a harvest gain. Decide which outcome matters here.

    Red and far-red adjustments are different treatments. If bays also differ in temperature, growing conditions are no longer comparable. Review spectrum, hours, and cultivar alongside temperature before interpretation.

    How Does Far-Red Light Affect Plant Growth?

    Two bays with matching PPFD can still show different new internode spacing. Look for new internodes and gaps between leaves first. Keep flowering dates apart from internodes.

    Growth Stage

    What Phytochrome Signaling Means for Growers

    Shading changes light conditions: compare red-to-far-red balance above and within the foliage. That mix is what phytochromes respond to, so mark leaf position when recording extension. A fixture’s spectrum cannot show the exact dose at every leaf.

    Record the cultivar on each comparison row. Height measurement documents extension, while weighing the harvests establishes any marketable yield change.

    How Far-Red Can Influence Stretch, Canopy Shape, and Flowering

    Return to each tagged stem to measure its post-treatment internodes. Record canopy and flowering changes separately. Where spacing exceeds the target for this cultivar, reduce far-red in the treated row. Let the desired plant form guide the decision.

    Stretch can change spacing, support needs, light distribution, and canopy access. Measure matching stems in both sections on the same day. Check form and flowering on separate rows before expanding further.

    When Should Growers Use Far-Red Light?

    Write the intended crop response on the trial sheet before changing far-red. Would extra height or earlier flowering help meet the crop target? Decide before adjusting far-red.

    Situations Where Far-Red May Support a Specific Growth Goal

    With the comparison bench’s lighting unchanged, adjust far-red alone on the bench assigned to treatment. Record:

    Start date, crop, cultivar, and growth stage.

    Full spectrum, intensity, exposure hours, and each reading date.

    Internode spacing in each group at the same reading time.

    Use matched starting stages; otherwise development already differs before the comparison begins.

    When to Reduce or Avoid Far-Red Light

    For compact crops, mark a node before changing the channel. Compare internodes with an untreated row. Switch off far-red if that distance crosses the cultivar target, then check growth. If a bay runs warmer or longer, also record it beside PPFD, airflow, and irrigation.

    Read timing and far-red proportion beside this cultivar’s flowering record before extending the treatment. The UV and infrared supplementation overview covers other bands. It cannot establish a yield benefit for this far-red trial alone.

    How Can You Add Far-Red Light Without Guesswork?

    Save the SPD; map canopy PPFD; record actual on and off times beside both.

    Evaluate Spectrum Alongside PPFD, Photoperiod, and DLI

    A comparison based on equal PPFD needs actual operating hours for each bay. Record actual bay lamp hours before comparing daily light integral (DLI). Match photoperiod before assigning an outcome to far-red.

    ANDYLED’s 240W 2x2ft fixture lists 730 nm in its spectrum. The listing does not establish independent far-red control. Request wiring evidence before calling that channel independently adjustable.

    Monitor Plant Response and the Growing Environment

    A comparison pairs photographs from a fixed camera position with dated environmental readings. Leaf posture, canopy gaps, and flowering can then be examined alongside airflow, humidity, canopy temperature, and irrigation. Drooping confined to the treated row might reflect different conditions between bays, so investigate those before adjusting far-red.

    Record bays individually, since a room average conceals local heat or weak lighting at the edges. At ANDYLED, our commercial grow light range shows formats; row width and controller layout decide which are worth comparing.

    How Do You Choose a Grow Light with Far-Red?

    The SPD and channel diagram answer different questions; request actual PPFD maps for the planned height and output.

    Check the Spectrum Data and Control Method

    For a fixture with a 730 nm peak, wiring must establish whether that output follows red, stays fixed, or adjusts independently. Confirm driver and controller match that method before specifying the fixture.

    The ANDYLED 120W 4FT deep-red under-canopy light lists 730 nm. Allow installation space beneath the upper foliage. This under-canopy format serves a position below the overhead fixture, so check placement separately.

    Under-Canopy grow light 1

    Match Fixture Coverage to the Growing Area

    Note where an upper-light pattern ends and whether a separate under-canopy unit reaches the intended leaves. A strong center reading can coexist with weak edges. Map both at installation height before judging coverage.

    Keep heat load and airflow in that review, and measure light at canopy level after installation. Judge the configuration against initial objectives using the crop observations before retaining settings.

    FAQ

    Q: What does far-red light do for plants?

    A: Inspect new internodes first. New internodes may lengthen, changing the canopy before any harvest is weighed. Flowering can shift as well. Stem height belongs in the trial notes; marketable yield needs separate measurements from both groups.

    Q: Is far-red light good for all plants?

    A: The crop shape matters. Extra extension benefits some crop targets and undermines others. Match growth stages when examining new internodes in each cultivar; the observations determine whether identical settings fit.

    Q: When should I use far-red light for plants?

    A: Test it for a defined height or flowering outcome. Keep the other same-stage row on its original light schedule. A longer stem without the desired result is a reason to stop.

    Q: Does far-red light make plants stretch?

    A: Sometimes. Look at new internodes; existing stems retain their length. Compare their lengths in two matched rows. If the treated row exceeds its planned spacing, reduce far-red and compare the next nodes before changing the entire grow room.

    Q: Can far-red light replace red light for plants?

    A: No. Conventional PPFD counts red photons but leaves 730 nm outside it. Keep the planned red spectrum. If a fixture adds far-red, judge stem spacing and flowering under the fixture’s complete spectrum before changing a whole room.